Österreichische Baunormen
Normdatenbank:
Dokumenten Nummer:
ÖNORM EN ISO 13433
Klassifikation:
ST*N
Preisgruppe:
Preisgruppe 11
Bezeichnung:
Geokunststoffe - Dynamischer Durchschlagversuch (Kegelfallversuch) (ISO 13433:2025)
zitierte Normen:
ersetzte Normen:
ÖNORM EN ISO 13433 (2024 06 01)*ÖNORM EN ISO 13433 (2006 11 01)
identische Norm:
Registriert als:
ISO 9862*ISO 554*ISO 10318-1*ISO 10320
Autor:
Komitee 023 Geotechnik
Referenz:
übersetzt in:
de*en
english text:
Geosynthetics - Determination of dynamic perforation (cone drop test) (ISO 13433:2025)
Description:
Dieses Dokument legt ein Verfahren zur Bestimmung des Widerstandes von Geokunststoffen gegen das dynamische Eindringen eines Stahlkegels fest, der aus einer bestimmten Höhe fallen gelassen wird. Das Verfahren ist allgemein auf Geokunststoffe anwendbar. Jedoch sollte die Anwendbarkeit dieser Prüfung für einige Produktarten (wie z. B. GGR,GCE, GST,GBR) sorgfältig geprüft werden.
francoise:
Géosynthétiques - Essai de perforation dynamique (essai par chute d'un cône) (ISO 13433:2025)
Normdatenbank:
Dokumenten Nummer:
ÖNORM EN ISO 13433
Klassifikation:
DC*N-E
Preisgruppe:
Preisgruppe 11
Bezeichnung:
Geokunststoffe - Dynamischer Durchschlagversuch (Kegelfallversuch) (ISO/DIS 13433:2024)
zitierte Normen:
ÖNORM EN ISO 13433 (2025 08 01)
ersetzte Normen:
identische Norm:
Registriert als:
Autor:
Komitee 023 Geotechnik
Referenz:
übersetzt in:
de*en
english text:
Geosynthetics - Determination of dynamic perforation (cone drop test) (ISO/DIS 13433:2024)
Description:
Diese Internationale Norm legt ein Verfahren zur Bestimmung des Widerstandes von Geokunststoffen gegen das dynamische Eindringen eines Stahlkegels fest, der aus einer bestimmten Ho¨he fallen gelassen wird. Der Grad des Eindringens ist ein Hinweis auf das dynamische Durchdringen des Geokunststoffes, wenn scharfkantige Steine auf seine Oberfla¨che fallen. Das Verfahren ist allgemein auf Geokunststoffe anwendbar. Die Gu¨ltigkeit dieser Pru¨fung fu¨r einige Produktarten sollte jedoch sorgfa¨ltig gepru¨ft werden, weil das Pru¨fprinzip mo¨glicherweise nicht anwendbar ist.
francoise:
Géosynthétiques - Essai de perforation dynamique (essai par chute d'un cône) (ISO/DIS 13433:2024)
Normdatenbank:
Dokumenten Nummer:
ÖNORM EN ISO 13433
Klassifikation:
ST*N
Preisgruppe:
Preisgruppe 10
Bezeichnung:
Geokunststoffe - Dynamischer Durchschlagversuch (Kegelfallversuch) (ISO 13433:2006)
zitierte Normen:
ÖNORM EN ISO 13433 (2025 08 01)
ersetzte Normen:
ÖNORM EN ISO 13433 (2004 09 01)*ÖNORM EN 918 (1996 02 01)
identische Norm:
Registriert als:
ISO 554*ISO 9862*ISO 10320
Autor:
Komitee 023 Geotechnik
Referenz:
ISO 13433 (2006) ,IDT*EN ISO 13433 (2006 08) ,IDT
übersetzt in:
de*en
english text:
Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006)
Description:
Diese Internationale Norm legt ein Verfahren zur Bestimmung des Widerstandes von Geokunststoffen gegen das Durchdringen eines Stahlkegels fest, der aus einer bestimmten Höhe fallen gelassen wird. Der Grad der Durchdringung ist ein Hinweis auf das Verhalten des Geokunststoffes, wenn scharfkantige Steine auf seine Oberfläche fallen gelassen werden. Das Verfahren ist allgemein auf Geokunststoffe anwendbar. Die Gültigkeit dieser Prüfung sollte jedoch bei einigen Produktarten sorgfältig geprüft werden, weil die Prüfungsbeschreibung nicht anwendbar zu sein braucht.
francoise:
Géosynthétiques - Essai de perforation dynamique (essai par chute d'un cône) (ISO 13433:2006)
Normdatenbank:
Dokumenten Nummer:
ÖNORM EN ISO 13433
Klassifikation:
DC*N-E
Preisgruppe:
Preisgruppe 13
Bezeichnung:
zitierte Normen:
ÖNORM EN ISO 13433 (2006 11 01)
ersetzte Normen:
identische Norm:
Registriert als:
Autor:
Komitee 023 Geotechnik
Referenz:
EN 14916 (2004) ,IDT*EN 1806 (2004) ,IDT
übersetzt in:
en
english text:
Geotextiles and geotextile related products - Dynamic perforation test (cone drop test) (ISO/DIS 13433:2004)
Description:
This European standard specifies the determination of the resistance of geosynthetics to the penetration by a steel cone dropped from a fixed height. The degree of penetration is an indication of the behaviour of the product likely to be caused by dropping sharp stones onto the geosynthetic. The method is generally appplicable to geosynthetics. The validity of this test for some types of products should be considered carefully, as the principle of the test may not be applicable for these materials.
francoise:
Géotextiles et produits apparentés - Essai de perforation dynamique (essai par chute d'un cône) (ISO/DIS 13433:2004)
Normdatenbank:
Dokumenten Nummer:
ÖNORM EN ISO 13433
Klassifikation:
DC*N-E
Preisgruppe:
Preisgruppe 13
Bezeichnung:
zitierte Normen:
ÖNORM EN ISO 13433 (2006 11 01)
ersetzte Normen:
identische Norm:
Registriert als:
Autor:
Komitee 023 Geotechnik
Referenz:
EN 15456 (2008 04) ,IDT*EN 1845 (2007 12) ,IDT
übersetzt in:
en
english text:
Geotextiles and geotextile related products - Dynamic perforation test (cone drop test) (ISO/DIS 13433:2004)
Description:
This European standard specifies the determination of the resistance of geosynthetics to the penetration by a steel cone dropped from a fixed height. The degree of penetration is an indication of the behaviour of the product likely to be caused by dropping sharp stones onto the geosynthetic. The method is generally appplicable to geosynthetics. The validity of this test for some types of products should be considered carefully, as the principle of the test may not be applicable for these materials.
francoise:
Géotextiles et produits apparentés - Essai de perforation dynamique (essai par chute d'un cône) (ISO/DIS 13433:2004)
Normdatenbank:
Dokumenten Nummer:
ÖNORM EN ISO 13433
Klassifikation:
DC*N-E
Preisgruppe:
Preisgruppe 9
Bezeichnung:
zitierte Normen:
ÖNORM EN ISO 13433 (2006 11 01)
ersetzte Normen:
identische Norm:
Registriert als:
Autor:
Komitee 023 Geotechnik
Referenz:
ISO 13433 (2004) ,IDT*EN ISO 13433 (2004) ,IDT
übersetzt in:
en
english text:
Geotextiles and geotextile related products - Dynamic perforation test (cone drop test) (ISO/DIS 13433:2004)
Description:
This European standard specifies the determination of the resistance of geosynthetics to the penetration by a steel cone dropped from a fixed height. The degree of penetration is an indication of the behaviour of the product likely to be caused by dropping sharp stones onto the geosynthetic. The method is generally appplicable to geosynthetics. The validity of this test for some types of products should be considered carefully, as the principle of the test may not be applicable for these materials.
francoise:
Géotextiles et produits apparentés - Essai de perforation dynamique (essai par chute d'un cône) (ISO/DIS 13433:2004)