Österreichische Baunormen

ÖNORM EN 1993-4-3

ST*N

Preisgruppe 22

Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen (konsolidierte Fassung)

ÖNORM EN 1993-4-3 (2007 09 01)

EN 1090-2*EN 1594*EN 1990*EN 1991*EN 1993-1-1*EN 1993-1-3*EN 1993-1-6*EN 1993-1-7*EN 1993-1-8*EN 1993-1-9*EN 1993-1-10*EN 1993-1-12*EN 1993-4-1*EN 1993-4-2*EN 1997*EN 1998-4*EN 12732*EN 14870-1*EN 14870-2*EN 14870-3*ISO 1000*ISO 3183-1*ISO 3183-2*ISO 3183-3*ISO 13623*ISO 13847-1*ISO 13847-2

Komitee 013 Stahl-, Verbund- und Aluminiumbau

EN 1993-4-3 (2007 02) ,IDT*EN 1993-4-3/AC (2009 07) ,IDT

de*en

Eurocode 3 - Design of steel structures - Part 4-3: Pipelines (consolidated version)

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3 - Calcul des structures en acier - Partie 4-3: Canalisations (version consolidée)

ÖNORM EN 1993-4-3

ST*N

Preisgruppe 27

Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen (konsolidierte Fassung)

ÖNORM EN 1993-4-3 (2007 09 01)*ÖNORM EN 1993-4-3 (2007 09 01)*ÖNORM EN 1993-4-3 (2007 09 01)

EN 14908-1:2005*EN 14908-2*EN 14908-3*EN 14908-4*EN 14908-5*ISO 11135:2014*ISO 11137-1:2006*ISO 11137-2:2013*ISO 11137-3:2006*ISO 11138-1:2006*ISO 11138-2:2006*ISO 11138-3:2006*ISO 11138-4:2006*ISO 11138-5:2006*ISO 11140-3:2007*ISO 11140-4:2007*ISO 11140-5:2007*ISO 17665-1:2006*ISO 1872:2006*ISO 8601:2004*ISO/TS 17665-2:2009*ISO/TS 17665-3:2013*ISO 1942*ISO 3665*ISO 8601*ISO 10683*ISO 1629

Komitee 013 Stahl-, Verbund- und Aluminiumbau

EN 14281 (2001 10) ,IDT*EN 14282 (2001 10) ,IDT

de*en

Eurocode 3 - Design of steel structures - Part 4-3: Pipelines (consolidated version)

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3 - Calcul des structures en acier - Partie 4-3: Canalisations (version consolidée)

ÖNORM EN 1993-4-3

ST*N

Preisgruppe 27

Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen (konsolidierte Fassung)

ÖNORM EN 1993-4-3 (2007 09 01)*ÖNORM EN 1993-4-3 (2007 09 01)*ÖNORM EN 1993-4-3 (2007 09 01)

ISO 11138-3:2006*ISO 11138-4:2006*ISO 11138-5:2006*ISO 11140-3:2007*ISO 11140-4:2007*ISO 11140-5:2007*ISO 17665-1:2006*ISO 1872:2006*ISO 8601:2004*ISO/TS 17665-2:2009*ISO/TS 17665-3:2013*ISO 1942*ISO 3665*ISO 8601*ISO 10683*ISO 1629*ISO 19879*ISO 261:1998*ISO 3601-3:2005*ISO 4042*ISO 4759-1:2000*ISO 48*ISO 5598*ISO 6149-1*ISO 6149-2*ISO 7789*ISO 9227

Komitee 013 Stahl-, Verbund- und Aluminiumbau

EN 14281 (2001 10) ,IDT*EN 14282 (2001 10) ,IDT

de*en

Eurocode 3 - Design of steel structures - Part 4-3: Pipelines (consolidated version)

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3 - Calcul des structures en acier - Partie 4-3: Canalisations (version consolidée)

ÖNORM EN 1993-4-3

ST*N

Preisgruppe 27

Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen (konsolidierte Fassung)

ÖNORM EN 1993-4-3 (2007 09 01)*ÖNORM EN 1993-4-3 (2007 09 01)*ÖNORM EN 1993-4-3 (2007 09 01)

ÖNORM EN ISO 75-2*ÖNORM EN ISO 787-2*ÖNORM ISO 12512*ÖNORM ISO 18851*ÖNORM ISO 1887*ÖNORM ISO 3374*ÖNORM ISO 3375*ÖNORM ISO 7685*ÖNORM ISO 8521*BGBI. Nr. 233/1970*ÖNORM B 1802*ÖNORM EN 12457-4*ÖNORM EN 13657*ÖNORM EN 14039*ÖNORM EN 14346*ÖNORM EN 16167*ÖNORM L 1075*ÖNORM L 1092*ÖNORM L 1094-1*ÖNORM S 2087*ÖNORM S 2088-1*ÖNORM S 2088-3*ÖNORM S 2089*ÖNORM EN 10025:1990*ÖNORM EN 1015-11*ÖNORM EN 1052-1*ÖNORM EN 1317-2

Komitee 013 Stahl-, Verbund- und Aluminiumbau

EN 13138-4 (2014 07) ,IDT*EN ISO 12643-1 (2014 05) ,IDT

de*en

Eurocode 3 - Design of steel structures - Part 4-3: Pipelines (consolidated version)

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3 - Calcul des structures en acier - Partie 4-3: Canalisations (version consolidée)

ÖNORM EN 1993-4-3

ST*N

Preisgruppe 27

Eurocode 3 - Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen (konsolidierte Fassung)

ÖNORM EN 1993-4-3 (2007 09 01)*ÖNORM EN 1993-4-3 (2007 09 01)*ÖNORM EN 1993-4-3 (2007 09 01)

ÖNORM EN ISO 787-2*ÖNORM ISO 12512*ÖNORM ISO 18851*ÖNORM ISO 1887*ÖNORM ISO 3374*ÖNORM ISO 3375*ÖNORM ISO 7685*ÖNORM ISO 8521*BGBI. Nr. 233/1970*ÖNORM B 1802*ÖNORM EN 12457-4*ÖNORM EN 13657*ÖNORM EN 14039*ÖNORM EN 14346*ÖNORM EN 16167*ÖNORM L 1075*ÖNORM L 1092*ÖNORM L 1094-1*ÖNORM S 2087*ÖNORM S 2088-1*ÖNORM S 2088-3*ÖNORM S 2089*ÖNORM EN 10025:1990*ÖNORM EN 1015-11*ÖNORM EN 1052-1*ÖNORM EN 1317-2*ÖNORM EN 1926

Komitee 013 Stahl-, Verbund- und Aluminiumbau

EN 19 (2014 07) ,IDT*EN 13138-4 (2014 07) ,IDT

de*en

Eurocode 3 - Design of steel structures - Part 4-3: Pipelines (consolidated version)

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3 - Calcul des structures en acier - Partie 4-3: Canalisations (version consolidée)

ÖNORM EN 1993-4-3

ST*N

Preisgruppe 21

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen

ÖNORM EN 1993-4-3 (2010 06 01)

ÖNORM EN 1993-4-3 (2004 05 01)

EN 805*EN 1011*EN 1090-2*EN 1295-1*EN 1594*EN 1990*EN 1991*EN 1993-1-1*EN 1993-1-3*EN 1993-1-6*EN 1993-1-7*EN 1993-1-8*EN 1993-1-9*EN 1993-1-10*EN 1993-1-12*EN 1993-4-1*EN 1993-4-2*EN 1997*EN 1998-4*EN 10208-1*EN 10208-2*EN 12007-1*EN 12007-2*EN 12007-3*EN 12732*EN 13445 Reihe*EN 13480 Reihe*EN 13941*EN 14161*EN 14870-1*EN 14870-2*EN 14870-3*ISO 1000*ISO 3183-1*ISO 3183-2*ISO 3183-3*ISO 13623*ISO 13847-1*ISO 13847-2

Komitee 013 Stahl-, Verbund- und Aluminiumbau

EN 1993-4-3 (2007) ,IDT

de*en

Eurocode 3: Design of steel structures - Part 4-3: Pipelines

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3: Calcul des structures en acier - Partie 4-3: Tuyauterie

ÖNORM EN 1993-4-3

ST*N

Preisgruppe 27

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen

ÖNORM EN 1993-4-3 (2010 06 01)*ÖNORM EN 1993-4-3 (2010 06 01)*ÖNORM EN 1993-4-3 (2010 06 01)

ÖNORM EN 1993-4-3 (2004 05 01)*ÖNORM EN 1993-4-3 (2004 05 01)*ÖNORM EN 1993-4-3 (2004 05 01)

ASTM E 2251-14*BS 2000*ISO 3170*ISO 3171*ISO 3696*ISO 4259*ISO 4788*ISO 5725-2*EN 2083*EN 2591 (alle Teile)*EN 2997-001*EN 3155-001*EN 3155-002*EN 3155-044*EN 4434*SAE-AS22520*SAE-AS81969*EN 12096*ISO 12100:2010*ISO 13732-1*ISO 13732-3*ISO 15744*ISO 20643*ISO 28927-2*ISO 3857-3*ISO 3864-2*ISO 4871*ISO 5391*ISO 7000*ISO 7010*ISO 7066*ISO 9158*ISO 9159*EN 14067-2*EN 14067-3*EN 14363*EN 15273-2*EN 15273-3*EN 15313

Komitee 013 Stahl-, Verbund- und Aluminiumbau

EN 12681-1 (2016 03) ,IDT

de*en

Eurocode 3: Design of steel structures - Part 4-3: Pipelines

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3: Calcul des structures en acier - Partie 4-3: Tuyauterie

ÖNORM EN 1993-4-3

ST*N

Preisgruppe 27

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen

ÖNORM EN 1993-4-3 (2010 06 01)*ÖNORM EN 1993-4-3 (2010 06 01)*ÖNORM EN 1993-4-3 (2010 06 01)

ÖNORM EN 1993-4-3 (2004 05 01)*ÖNORM EN 1993-4-3 (2004 05 01)*ÖNORM EN 1993-4-3 (2004 05 01)

BS 2000*ISO 3170*ISO 3171*ISO 3696*ISO 4259*ISO 4788*ISO 5725-2*EN 2083*EN 2591 (alle Teile)*EN 2997-001*EN 3155-001*EN 3155-002*EN 3155-044*EN 4434*SAE-AS22520*SAE-AS81969*EN 12096*ISO 12100:2010*ISO 13732-1*ISO 13732-3*ISO 15744*ISO 20643*ISO 28927-2*ISO 3857-3*ISO 3864-2*ISO 4871*ISO 5391*ISO 7000*ISO 7010*ISO 7066*ISO 9158*ISO 9159*EN 14067-2*EN 14067-3*EN 14363*EN 15273-2*EN 15273-3*EN 15313*EN 50119

Komitee 013 Stahl-, Verbund- und Aluminiumbau

CEN/TS 16986 (2016 03) ,IDT

de*en

Eurocode 3: Design of steel structures - Part 4-3: Pipelines

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3: Calcul des structures en acier - Partie 4-3: Tuyauterie

ÖNORM EN 1993-4-3

ST*N

Preisgruppe 27

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen

ÖNORM EN 1993-4-3 (2010 06 01)*ÖNORM EN 1993-4-3 (2010 06 01)*ÖNORM EN 1993-4-3 (2010 06 01)

ÖNORM EN 1993-4-3 (2004 05 01)*ÖNORM EN 1993-4-3 (2004 05 01)*ÖNORM EN 1993-4-3 (2004 05 01)

EN 2591 Reihe*EN 3155-001*EN 3155-002*EN 3155-029*EN 3155-039*EN 3682-001*EN 4008-015*EN 4008-017*MIL-DTL-22520*MIL-I-81969*TR 6058*TS 22.002*TS 22.011*TS 22.060*TS 23.003*TS 23.014*TS 23.022*TS 23.060*TS 23.071*TS 24.007*TS 24.008*TS 24.010*TS 24.071*TS 24.080*TS 24.081*TS 24.082*TS 24.083*TS 24.084*TS 24.085*TS 24.086*TS 27.001*TS 29.002*TS 29.007*EN 301144-1:1998*ETS 300109:1992*ETS 300110:1992*ETS 300111:1992*GSM 01.04*GSM 02.07

Komitee 013 Stahl-, Verbund- und Aluminiumbau

EN 300175-4 V 1.5.1 (2001) ,IDT

de*en

Eurocode 3: Design of steel structures - Part 4-3: Pipelines

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3: Calcul des structures en acier - Partie 4-3: Tuyauterie

ÖNORM EN 1993-4-3

ST*N

Preisgruppe 27

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen

ÖNORM EN 1993-4-3 (2010 06 01)*ÖNORM EN 1993-4-3 (2010 06 01)*ÖNORM EN 1993-4-3 (2010 06 01)

ÖNORM EN 1993-4-3 (2004 05 01)*ÖNORM EN 1993-4-3 (2004 05 01)*ÖNORM EN 1993-4-3 (2004 05 01)

EN 3218-006*EN 4008-011*MIL-C-22520/1-01*MIL-C-22520/2-01*MIL-C-22520/7-01*MIL-DTL-22520*EN 2083*EN 2591 Reihe*EN 3155-001*EN 3155-002*EN 3155-029*EN 3155-039*EN 3682-001*EN 4008-015*EN 4008-017*MIL-DTL-22520*MIL-I-81969*TR 6058*TS 22.002*TS 22.011*TS 22.060*TS 23.003*TS 23.014*TS 23.022*TS 23.060*TS 23.071*TS 24.007*TS 24.008*TS 24.010*TS 24.071*TS 24.080*TS 24.081*TS 24.082*TS 24.083*TS 24.084*TS 24.085*TS 24.086*TS 27.001*TS 29.002

Komitee 013 Stahl-, Verbund- und Aluminiumbau

EN ISO 19296 (2018 12) ,IDT

de*en

Eurocode 3: Design of steel structures - Part 4-3: Pipelines

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3: Calcul des structures en acier - Partie 4-3: Tuyauterie

ÖNORM EN 1993-4-3

DC*N-E

Preisgruppe 17

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen

ÖNORM EN 1993-4-3 (2007 09 01)

Komitee 013 Stahl-, Verbund- und Aluminiumbau

EN 1993-4-3 (2004) ,IDT

en

Eurocode 3: Design of steel structures - Part 4-3: Pipelines

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3: Calcul des structures en acier - Partie 4-3: Tuyauterie

ÖNORM EN 1993-4-3

DC*N-E

Preisgruppe 22

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen

ÖNORM EN 1993-4-3 (2007 09 01)*ÖNORM EN 1993-4-3 (2007 09 01)

Komitee 013 Stahl-, Verbund- und Aluminiumbau

EN 16777 (2014 07) ,IDT

en

Eurocode 3: Design of steel structures - Part 4-3: Pipelines

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3: Calcul des structures en acier - Partie 4-3: Tuyauterie

ÖNORM EN 1993-4-3

DC*N-E

Preisgruppe 22

Eurocode 3: Bemessung und Konstruktion von Stahlbauten - Teil 4-3: Rohrleitungen

ÖNORM EN 1993-4-3 (2007 09 01)*ÖNORM EN 1993-4-3 (2007 09 01)

Komitee 013 Stahl-, Verbund- und Aluminiumbau

EN ISO 4022 (2006 04) ,IDT

en

Eurocode 3: Design of steel structures - Part 4-3: Pipelines

This Part 4-3 of ÖNORM EN 1993 provides principles and application rules for the structural design of cylindrical steel pipelines for the transport of liquids or gases or mixtures of liquids and gases at ambient temperatures, which are not treated by other European standards covering particular applications. This ÖNORM is specifically intended for use on: Buried pipelines in settlement areas and in non-settlement areas; Buried pipelines crossing dykes, traffic roads and railways and canals. The design of pipelines involves many different aspects. Examples are routing, pressure safety systems, corrosion protection, construction and welding, operation and maintenance. For aspects other than the structural design of the pipeline itself, reference is made to the relevant European standards listed in 1.3. This is also the case for elements like valves, fittings, insulating couplings, tees and caps. Pipelines usually comprise several associated facilities such as pumping stations, operation centres, maintenance stations, etc. each of them housing different sorts of mechanical and electrical equipment. Since these facilities have a considerable influence on the continued operation of the system, it is necessary to give them adequate consideration in the design process aimed at satisfying the overall reliability requirements. However, explicit treatment of these facilities, is not included within the scope of this ÖNORM.

Eurocode 3: Calcul des structures en acier - Partie 4-3: Tuyauterie