HilfeKontakt
Anmelden Merkliste - Baustoffe
Start > Informationen > Ö-Normen

Österreichische Baunormen

Norm-Informationen:
Normdatenbank:
Dokumenten Nummer:
ÖNORM EN 15037-1
Klassifikation:
ST*N
Preisgruppe:
Preisgruppe 42
Bezeichnung:
Betonfertigteile - Balkendecken mit Zwischenbauteilen - Teil 1: Balken
zitierte Normen:
ersetzte Normen:
ÖNORM EN 15037-1 (2004 12 01)
identische Norm:
Registriert als:
DIN 16945:1989*EN 59:1977*ISO 14130:1997*ISO 1675:1985*ISO 178:1993*ISO 1887:1995*ISO 1889:1997*ISO 2078:1993
Autor:
Komitee 075 Vorgefertigte Betonerzeugnisse
Referenz:
IEC 601-2-33 (1995) ,IDT
übersetzt in:
de*en
english text:
Precast concrete products - Beam-and-block floor systems - Part 1: Beams
Description:
This ÖNORM deals with the requirements, the basic performance criteria and evaluation of conformity for precast beams made of reinforced or prestressed normal weight concrete according to ÖNORM EN 1992-1-1; used in conjunction with blocks in compliance with WI 00229010-2 and/or cast in-situ concrete (topping) for the construction of beam-and-block floor systems. Annex A gives the typology of different types of floor systems. The depth of the beam shall not exceed 300 mm and the beams shall be at centres of not more than 1,00 m. They should be arranged in groups to strength the floor. The beams shall be manufactured in factories by moulding, slip-forming, or extrusion. The products covered by this standard are intended to be used as structural floor systems which are not subjected to fatigue loading, as well as those in circulation areas or parking areas for light vehicles corresponding to traffic category F of ÖNORM EN 1991-1-1. The products may be used in seismic areas provided they fulfil the requirements specific to this use.
francoise:
Produits préfabriqués en béton - Systèmes de planchers à poutrelles et entrevous - Partie 1: Poutrelles
Normdatenbank:
Dokumenten Nummer:
ÖNORM EN 15037-1
Klassifikation:
ST*N
Preisgruppe:
Preisgruppe 37
Bezeichnung:
Betonfertigteile - Balkendecken mit Zwischenbauteilen - Teil 1: Balken
zitierte Normen:
ersetzte Normen:
ÖNORM EN 15037-1 (2004 12 01)
identische Norm:
Registriert als:
EN 1990:2002*EN 1992-1-1:2004*EN 1992-1-2:2004*EN 10080:2005*EN 12390-4:2000*EN 13369:2004*EN 15037-2*EN 15037-3
Autor:
Komitee 075 Vorgefertigte Betonerzeugnisse
Referenz:
EN 15037-1 (2008 04) ,IDT
übersetzt in:
de*en
english text:
Precast concrete products - Beam-and-block floor systems - Part 1: Beams
Description:
This ÖNORM deals with the requirements, the basic performance criteria and evaluation of conformity for precast beams made of reinforced or prestressed normal weight concrete according to ÖNORM EN 1992-1-1; used in conjunction with blocks in compliance with WI 00229010-2 and/or cast in-situ concrete (topping) for the construction of beam-and-block floor systems. Annex A gives the typology of different types of floor systems. The depth of the beam shall not exceed 300 mm and the beams shall be at centres of not more than 1,00 m. They should be arranged in groups to strength the floor. The beams shall be manufactured in factories by moulding, slip-forming, or extrusion. The products covered by this standard are intended to be used as structural floor systems which are not subjected to fatigue loading, as well as those in circulation areas or parking areas for light vehicles corresponding to traffic category F of ÖNORM EN 1991-1-1. The products may be used in seismic areas provided they fulfil the requirements specific to this use.
francoise:
Produits préfabriqués en béton - Systèmes de planchers à poutrelles et entrevous - Partie 1: Poutrelles
Normdatenbank:
Dokumenten Nummer:
ÖNORM EN 15037-1
Klassifikation:
ST*N
Preisgruppe:
Preisgruppe 42
Bezeichnung:
Betonfertigteile - Balkendecken mit Zwischenbauteilen - Teil 1: Balken
zitierte Normen:
ersetzte Normen:
ÖNORM EN 15037-1 (2004 12 01)
identische Norm:
Registriert als:
ÖNORM EN 1176-2*ÖNORM EN 1176-3*ÖNORM EN 1176-4*ÖNORM EN 1176-5*ÖNORM EN 1176-6*ÖNORM EN 1176-7*ÖNORM EN 15567-1*ÖNORM EN 15567-2
Autor:
Komitee 075 Vorgefertigte Betonerzeugnisse
Referenz:
EN ISO 12782-4 (2012 06) ,IDT
übersetzt in:
de*en
english text:
Precast concrete products - Beam-and-block floor systems - Part 1: Beams
Description:
This ÖNORM deals with the requirements, the basic performance criteria and evaluation of conformity for precast beams made of reinforced or prestressed normal weight concrete according to ÖNORM EN 1992-1-1; used in conjunction with blocks in compliance with WI 00229010-2 and/or cast in-situ concrete (topping) for the construction of beam-and-block floor systems. Annex A gives the typology of different types of floor systems. The depth of the beam shall not exceed 300 mm and the beams shall be at centres of not more than 1,00 m. They should be arranged in groups to strength the floor. The beams shall be manufactured in factories by moulding, slip-forming, or extrusion. The products covered by this standard are intended to be used as structural floor systems which are not subjected to fatigue loading, as well as those in circulation areas or parking areas for light vehicles corresponding to traffic category F of ÖNORM EN 1991-1-1. The products may be used in seismic areas provided they fulfil the requirements specific to this use.
francoise:
Produits préfabriqués en béton - Systèmes de planchers à poutrelles et entrevous - Partie 1: Poutrelles
Normdatenbank:
Dokumenten Nummer:
ÖNORM EN 15037-1
Klassifikation:
DC*N-E
Preisgruppe:
Preisgruppe 28
Bezeichnung:
zitierte Normen:
ÖNORM EN 15037-1 (2008 08 01)
ersetzte Normen:
identische Norm:
Registriert als:
Autor:
Komitee 075 Vorgefertigte Betonerzeugnisse
Referenz:
EN 15037-1 (2004) ,IDT
übersetzt in:
en
english text:
Precast concrete products - Beam-and-block floor systems - Part 1: Beams
Description:
This ÖNORM deals with the requirements, the basic performance criteria and evaluation of conformity for precast beams made of reinforced or prestressed normal weight concrete according to ÖNORM EN 1992-1-1; used in conjunction with blocks in compliance with WI 00229010-2 and/or cast in-situ concrete (topping) for the construction of beam-and-block floor systems. Annex A gives the typology of different types of floor systems. The depth of the beam shall not exceed 300 mm and the beams shall be at centres of not more than 1,00 m. They should be arranged in groups to strength the floor. The beams shall be manufactured in factories by moulding, slip-forming, or extrusion. The products covered by this standard are intended to be used as structural floor systems which are not subjected to fatigue loading, as well as those in circulation areas or parking areas for light vehicles corresponding to traffic category F of ÖNORM EN 1991-1-1. The products may be used in seismic areas provided they fulfil the requirements specific to this use.
francoise:
Produits préfabriqués en béton - Systèmes de planchers à poutrelles et entrevous - Partie 1 : Poutrelles
Normdatenbank:
Dokumenten Nummer:
ÖNORM EN 15037-1
Klassifikation:
DC*N-E
Preisgruppe:
Preisgruppe 39
Bezeichnung:
zitierte Normen:
ÖNORM EN 15037-1 (2008 08 01)
ersetzte Normen:
identische Norm:
Registriert als:
Autor:
Komitee 075 Vorgefertigte Betonerzeugnisse
Referenz:
EN 1425 (1999 10) ,IDT
übersetzt in:
en
english text:
Precast concrete products - Beam-and-block floor systems - Part 1: Beams
Description:
This ÖNORM deals with the requirements, the basic performance criteria and evaluation of conformity for precast beams made of reinforced or prestressed normal weight concrete according to ÖNORM EN 1992-1-1; used in conjunction with blocks in compliance with WI 00229010-2 and/or cast in-situ concrete (topping) for the construction of beam-and-block floor systems. Annex A gives the typology of different types of floor systems. The depth of the beam shall not exceed 300 mm and the beams shall be at centres of not more than 1,00 m. They should be arranged in groups to strength the floor. The beams shall be manufactured in factories by moulding, slip-forming, or extrusion. The products covered by this standard are intended to be used as structural floor systems which are not subjected to fatigue loading, as well as those in circulation areas or parking areas for light vehicles corresponding to traffic category F of ÖNORM EN 1991-1-1. The products may be used in seismic areas provided they fulfil the requirements specific to this use.
francoise:
Produits préfabriqués en béton - Systèmes de planchers à poutrelles et entrevous - Partie 1 : Poutrelles
Normdatenbank:
Dokumenten Nummer:
ÖNORM EN 15037-1
Klassifikation:
DC*N-E
Preisgruppe:
Preisgruppe 39
Bezeichnung:
zitierte Normen:
ÖNORM EN 15037-1 (2008 08 01)
ersetzte Normen:
identische Norm:
Registriert als:
Autor:
Komitee 075 Vorgefertigte Betonerzeugnisse
Referenz:
EN 3745-202 (2005 11) ,IDT
übersetzt in:
en
english text:
Precast concrete products - Beam-and-block floor systems - Part 1: Beams
Description:
This ÖNORM deals with the requirements, the basic performance criteria and evaluation of conformity for precast beams made of reinforced or prestressed normal weight concrete according to ÖNORM EN 1992-1-1; used in conjunction with blocks in compliance with WI 00229010-2 and/or cast in-situ concrete (topping) for the construction of beam-and-block floor systems. Annex A gives the typology of different types of floor systems. The depth of the beam shall not exceed 300 mm and the beams shall be at centres of not more than 1,00 m. They should be arranged in groups to strength the floor. The beams shall be manufactured in factories by moulding, slip-forming, or extrusion. The products covered by this standard are intended to be used as structural floor systems which are not subjected to fatigue loading, as well as those in circulation areas or parking areas for light vehicles corresponding to traffic category F of ÖNORM EN 1991-1-1. The products may be used in seismic areas provided they fulfil the requirements specific to this use.
francoise:
Produits préfabriqués en béton - Systèmes de planchers à poutrelles et entrevous - Partie 1 : Poutrelles